Juniper Enhanced DPC DPCE-R-20GE-2XGE User Manual
Product codes
DPCE-R-20GE-2XGE
•
The ports are labeled:
•
4-port: 0-3
•
8-port: 0-7
•
Maximum transmission units (MTUs) of up to 9192 bytes
Hardware features
•
Per-port SONET/SDH framing
•
Local and remote loopback on each port
•
Optical diagnostics and monitoring
•
Clocking options: internal or external/loop mode.
•
Encapsulations:
•
Multi-Protocol Label Switching (MPLS) fast reroute
•
MPLS CCC (Circuit Cross-Connection)
•
MPLS TCC (Translational Cross-Connection)
•
Cisco High-Level Data Link Control (cHDLC)
•
cHDLC CCC
•
cHDLC TCC
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
PPP over Frame Relay
NOTE:
Ethernet over Frame Relay is not supported.
Software features
•
Duplex LC/PC connector (Rx and Tx)
•
SONET/SDH OC3/STM1 small form-factor pluggable (SFP) transceivers:
•
Multimode (model number: SFP-OC3-SR)
•
Intermediate reach (IR-1) (model number: SFP-OC3-IR)
•
Long reach (LR-1) (model number: SFP-OC3-LR)
Optical interface specifications—see SONET/SDH OC3/STM1 Optical Interface Specifications
•
SONET/SDH OC12/STM4 small form-factor pluggable (SFP) transceivers:
•
Short reach (model number: SFP-OC12-SR)
•
Intermediate reach (IR-1) (model number: SFP-OC12-IR)
•
Long reach (LR-1) (model number: SFP-OC12-LR)
Optical interface specifications—see SONET/SDH OC12/STM4 Optical Interface Specifications
•
SONET/SDH OC48/STM16 small form-factor pluggable (SFP) transceivers:
•
Multimode (model number: SFP-1OC48-SR)
•
Intermediate reach (IR-1) (model number: SFP-1OC48-IR)
•
Long reach (LR-1) (model number: SFP-1OC48-LR)
Optical interface specifications—see SONET/SDH OC48/STM16 Optical Interface Specifications
Cables and
connectors
connectors
129
Copyright © 2012, Juniper Networks, Inc.
SONET/SDH OC3/STM1 (Multi-Rate) MICs with SFP