Gorenje K 10 KARIM User Manual
16
– Farm houses;
– By clients in hotels, motels and other
residential type environments;
– Bed and breakfast type environments.
– By clients in hotels, motels and other
residential type environments;
– Bed and breakfast type environments.
28. Save these instructions.
This appliance is marked according to
the European directive 2002/96/EC on
Waste Electrical and Electronic
Equipment (WEEE). This guideline is the
frame of a European-wide validity of
return and recycling on Waste Electrical
and Electronic Equipment.
Using the appliance
1. Place the kettle on the flat surface.
2. To fill the kettle, take away the kettle from the
2. To fill the kettle, take away the kettle from the
power base and then remove the lid.
NOTE:
NOTE:
How to place or remove the lid see on
the picture below.
3. Fill proper drinking water into the kettle and
replace the lid .
NOTE: Do not fill the water over the maximum
level shown in the inside of the kettle. Water
may spill out of the spout.
level shown in the inside of the kettle. Water
may spill out of the spout.
4. Lay the kettle on the power base and connect
the plug into a power outlet.
NOTE: Designed power base can be rotated
for 360 degree. It is for easier plug connecting
with power outlet.
NOTE: Designed power base can be rotated
for 360 degree. It is for easier plug connecting
with power outlet.
5. Press down th
e On/Off switch to “I” position, the
working indicator will light up,then start to boil
the water. The kettle will switch off
automatically once the water is boiled. You can
be shut the power off by pressing On/Off
switch to “0” position or lifting the kettle from the
power base. If necessary, it will take you 30
seconds to wait before pressing the switch
again to re-boil water.
the water. The kettle will switch off
automatically once the water is boiled. You can
be shut the power off by pressing On/Off
switch to “0” position or lifting the kettle from the
power base. If necessary, it will take you 30
seconds to wait before pressing the switch
again to re-boil water.
6. Lift the kettle from the power base and
then pour the water.
NOTE: Operate carefully when pouring the
water from your kettle, beacuse of the
boiling water, don not open the lid while
the water in the kettle is hot.
NOTE: Operate carefully when pouring the
water from your kettle, beacuse of the
boiling water, don not open the lid while
the water in the kettle is hot.
7. The kettle will not re-boil unless you press
the switch again. You can leave the kettle
on the power base when you do not in use.
NOTE: Turn the power off, when you do
not use the kettle.
on the power base when you do not in use.
NOTE: Turn the power off, when you do
not use the kettle.
Boil
– dry protection
If you accidentally let the kettle operate
without water, the boil-dry protection will
automatically switch off the power. Allow the
kettle to cool before filling it with cold water to
re-boil.
without water, the boil-dry protection will
automatically switch off the power. Allow the
kettle to cool before filling it with cold water to
re-boil.
Cleaning and maintenance
Always disconnect the appliance from the
power outlet and allow it cool down
completely before cleaning.
1. Never immerse the kettle, power cord or
power outlet and allow it cool down
completely before cleaning.
1. Never immerse the kettle, power cord or
power base in water, or allow moisture to
come in contact with these parts.
come in contact with these parts.
2. Wipe the appearance of ceramic body with
a mild and damp cloth or cleaner, never
use the toxic cleaner. Also, wipe the lid
with a mild and damp cloth or cleaner, then
position it in place.
CAUTION: Do not use chemical, steel,
wooden or abrasive cleaners to clean the
outside of the kettle so as to prevent the
gloss loss.
use the toxic cleaner. Also, wipe the lid
with a mild and damp cloth or cleaner, then
position it in place.
CAUTION: Do not use chemical, steel,
wooden or abrasive cleaners to clean the
outside of the kettle so as to prevent the
gloss loss.
3. When the kettle not in use, store the power
cord in the cord storage at the bottom of
power base.
power base.
Descaling the kettle
Regular descaling will prolong the life of the
kettle.
In case of normal use (up to 5 times a day), the
following descaling frequency is recommended:
kettle.
In case of normal use (up to 5 times a day), the
following descaling frequency is recommended:
Once every 3 months for soft water areas
(up to 18 dH).
(up to 18 dH).
Once every month for hard water areas
(more than 18 dH).
(more than 18 dH).