Bosch TDS-2241 Sensixx B 22 L User Manual

16

BOSCH

•  This appliance has been designed exclusively 

for domestic use and must not be used for 

industrial purposes. 

•  This appliance must be used only for the 

purposes for which it was designed, i.e. as an 

iron. Any other use will be considered improper 

and consequently dangerous. The manufacturer 

will not be held responsible for any damage 

arising from misuse or improper use.

•  This appliance is to be connected and used in 

accordance with the information stated on its 

characteristics plate.

•  This appliance must be connected to an 

earthed socket. If it is absolutely necessary to 

use an extension cable, make sure that it is 

suitable for 16A and has a socket with an earth 

connection.

•  If the safety fuse fitted in the appliance blows, 

the appliance will be rendered inoperative. To 

restore normal operation the appliance will 

have to be taken to an authorised Technical 

Service Centre.

•  In order to avoid that, under unfavourable 

mains conditions, phenomena like transient 

voltage drops or lighting fluctuations can 

happen, it is recommended that the iron is 

connected to a power supply system with a 

maximum impedance of 0.27 Ω. If necessary, 

the user can ask the public power supply 

company for the system impedance at the 

interface point.

•  The appliance must never be placed directly 

under the tap to fill the water tank.

•  Unplug the appliance from the mains supply 

after each use, or if a fault is suspected.

•  The electrical plug must not be removed from 

the socket by pulling the cable.

•  Never immerse the iron in water or any other 

fluid.

•  Do not leave the appliance exposed to weather 

conditions (rain, sun, frost, etc.)

•  This appliance reaches high temperatures and 

produces steam during use, this could cause 

scalds or burns if not used properly. 

•  The steam hose, base station, metal plate at 

the bottom of the removable iron pad (2) and in 

particular the iron can get hot when used. This 

is normal.

•  Never aim the steam at people or animals.

•  Do not allow the power cable to come into 

contact with the soleplate when it is hot.

•  Be aware that the system can keep on 

steaming for a short additional time after 

releasing the steam trigger. This is a normal 

function.

Our goods come in optimised packaging. This 

basically consists in using non-contaminating 

materials which should be handed over to the 

local waste disposal service as secondary raw 

materials. Your local town council can give you 

information about how to dispose of obsolete 

appliances.

  1. Water tank

  2. Removable iron pad 

  3. Steam hose storage fixing

  4. “Calc'n'Clean Advanced” * scale collector

  5. Mains cable storage compartment 

  6. Mains cable 

  7. Steam hose 

  8. “Energy Saving” button 

  9. “Steam ready” / “Auto shut-off*” pilot light 

10. “on / off” pilot light *

11. Variable steam control *

12. “Refill water tank” / “Clean warning” pilot light*

13. Main power switch (0/I)

14. Iron fixation system “SecureLock” *

15. Housing with internal steam generator 

16. Temperature control knob

17. Steam release button

18. Steam shot button “Ultimate” *

19. Iron pilot light

20. Soleplate

21. Fabric-protection soleplate cover *