Zigmund & Shtain EN 262.722 B User Manual

Page of 14
e n g l i s h
3
1
2
Installation
Using the oven
To fi nd out which model your oven is (“a”, “b”, 
c”) compare its control panel with the control 
panels shown in the illustrations.
1.1 Unpacking. Remove all the protective 
packaging elements.
1.2 Mains connection. Always take into account 
the data on the reference plate (1.2.1) and 
the measurements of the cabinet the oven 
will be housed in (1.2.2, 1.2.3).
 Independent 
oven: 
the appliance must be 
connected to the mains with a fi xed single-
phase connection with the neutral (blue) 
connection guaranteed (1.2.4).  Fit the oven 
into the space, ensuring there is no excess 
cable in the upper part (1.2.5, 1.2.6). Screw 
it to the fi tting using the two screws supplied 
(1.2.7). The fi tted furniture or its surface must 
be heat-resistant. The time must be set in 
order to fi nish the installation (a, b, c). After 
a period of inactivity, the machine will turn to 
standby and its brightness will diminish or 
the screen will switch off, depending on the 
model.
0
Identifi cation
Before using your new oven for the fi rst time, 
heat it up while empty
 (with no food in it and 
with the control turned to 
 , at for 30 minutes 
at 250ºC). It may produce some smoke or a bad 
smell (this is normal and is caused by the oven 
heating up grease residue etc.). When it has 
cooled down, pre-clean it by wiping the inside 
with a damp cloth.
2.1 Accessories. Depending on the model 
there is a Deep Tray (2.1.1), Flat Tray (2.1.2) 
and Multifunctional Grill (2.1.3) that work 
separately. If it also possible to combine 
either tray with the Multifunctional Grill 
(2.1.4) to make a set. All the accessories 
or sets can be used directly or mounted 
on the Partial Extraction Grill (2.1.5) or the 
Total Extraction Grill (2.1.6, 2.1.7), (2.1.8). 
If you have the partial extraction tray, it can 
be used separately or together with trays 
(3 types) (2.1.9). The Simple Grill is used 
separately (2.1.10). If you have telescopic 
rails, remove the tray before installing them in 
the oven (2.1.11). The telescopic rails extend 
automatically due to the weight of the tray 
when the oven is opened (2.1.12). Food must 
always be placed on a tray on the telescopic 
rails (2.1.13). Bear in mind the position of the 
grills when installing them. There are anti-
tipping stops at the sides (2.1.14). 
2.2 Accessory positions. The accessories 
can be fi tted in 5 different positions,
2.3  Setting the time. When you switch on the 
oven, the display will fl ash (2.3.1, 2.3.2). 
Adjust the time by pressing the   or    
(2.3.3, 2.3.4). The time will automatically be 
validated after 5 seconds.
 
Note: the time will need to be set again after 
an electricity cut or when the hour changes.
2.4  Cooking the food. Place the food in the 
oven. Consult the cooking table to choose 
the accessory or accessories to be used and 
their position. Close the oven door.
2.5  Selecting the cooking function 
 . Select 
the cooking function according to the model 
  Traditional fanned heat. For any kind of 
dish. Several dishes may be cooked at once 
without their fl avours or smells mixing.
  Turbo plus. The heat is produced by the 
central element.
  Fanned high grill. This browns the food, 
distributing the heat evenly. Ideal for large-
sized roasts.
  High grill. For browning pasta, souffl és and 
bechamel sauce.
 Low grill. For hamburgers, toast and food 
with a small surface area.
  Fanned base heat. The fan distributes the 
base heat evenly. Suitable for paellas.
 Traditional heat. For bread, cakes, cakes 
with fi lling and lean meat.
  Defrost. Rapidly thaws any kind of food.
 
Celeris. For pre-heating the oven. 
2.6  Selecting the temperature 
. Select the 
temperature by turning the selector dial. The 
pilot light will switch off when the selected 
temperature is reached.
TIME FUNCTIONS 
2.7  Selecting the cooking time. Timer  : select 
the minutes by turning the selector dial. (2.7.1). 
If you prefer the oven to function without a 
time limit, turn it to hand position  . 
 Digital 
clock: Select the cooking function 
and the desired temperature. Press   
until 
 or 
 starts to fl ash (2.7.2, 2.7.3). 
Adjust the cooking time by pressing   or 
 (2.7.4, 2.7.5). After a few seconds the