Philips SC 1995/00 Lumea Advanced IPL User Manual

- This symbol means that this product shall not be disposed of with normal

household waste (2012/19/EU).

- Follow your country's rules for the separate collection of electrical and

electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.

Rated voltage

100V-240V

Rated frequency

50Hz-60Hz

Rated input

36W

Protection against electric shock

Class II 

Protections rating

IP 30 (EN 60529)

Operating conditions

Temperature:+15 ºC to 35

 °C

 

Relative humidity: 30% to 95%

Spectrum of body attachment

>530nm

 

This chapter summarizes the most common problems you could encounter
with the device. If you are unable to solve the problem with the information
below, visit www.philips.com/support for a list of frequently asked questions
or contact the Consumer Care Center in your country.

The device/adapter

becomes warm during use

This is normal.

No action required.

The 'ready to flash light'

doesn't light up when I

place the attachment on

my skin, but the cooling fan

works.

The overheat protection has

been activated.

When the overheat protection has been

activated, the fan still works. Do not

switch off the device, but let it cool down

for approx.

 15 minutes before you

continue to use it.

The 'ready to flash light'

lights up green but the

device does not produce a

flash when I press the flash

button.

The device needs to be reset. To reset the device, switch it off and

switch it on again.

16