Cisco Cisco Integrated Storage System Module Installation Guide

Page of 6
 
Connecting Cisco Integrated Storage System Enhanced Network Modules to the Network
  Cisco Integrated Storage System Enhanced Network Modules
2
Connecting Cisco Integrated Storage System Enhanced Network Modules to the Network
Figure 1
NME-ISS Faceplate
Shutting Down Cisco Integrated Storage System Enhanced Network Modules
Press the SHUTDOWN button on the network module faceplate for less than 2 seconds to perform a 
graceful shutdown of the network module before removing power from the router or before starting an 
online insertion and removal (OIR) sequence on the router. The application may take up to 2 minutes to 
fully shut down.
Table 2
NME-ISS LED Description
CF
The Compact Flash slot is not used on the NME-ISS module.
SHUTDOWN
Press the SHUTDOWN button for less than 2 seconds to gracefully shut down the 
module. Press the SHUTDOWN button for more than 4 seconds to cause an immediate 
module shutdown, which may affect file operations that are in progress.
LINK
Status of Gigabit Ethernet link
On—Link is enabled
Off—Link is disabled
ACT
Status of Gigabit Ethernet activity
On—Active
Off—Inactive
DISK
Status of hard drive activity
On—Active
Off—Inactive
SYS
Status of system shutdown
Note
Do not remove power without first shutting down the application.
On—Application is stable.
Off—System is shut down and ready for host power-down
Flashing—System shutdown is in progress
EN
Status of the network module 
On—Detected by the host Cisco IOS software and enabled.
Off—Disabled.
232083
SHUTDOWN:
GRACEFUL <1 s
IMMEDIATE >4 s
CF
LINK
ACT
SYS
DISK
EN
GigE
USB
NOT
SUPPORTED
NME-VMSS-HP32
XXX-XXXXX-XX  XX
CF
Shutdown
LINK
ACT
DISK
SYS
CF card
EN
Never remove compact
flash during operation
Shut down
application
before removing or
power cycling.