Fujitsu PRIMERGY TX200 S5F VFY:T2005SF030NL Data Sheet
Product codes
VFY:T2005SF030NL
Datasheet
Fujitsu PRiMERGY tX200 s5 sERvER
Page 4 / 9
http://ts.fujitsu.com/Primergy
MeMoRY MoDules PeRFoRMance
MoDe
MoDe
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
InteRFaces
usB ports
10 x USB 2.0 (3x front USB, 4x rear USB 3x intern for Backup, USSD and internal USB)
Graphics (15-pin)
1 x VGA
serial 1 (9-pin)
1 x serial RS-232-C (9 pin), usable for iRMC S2 or System or common use
serial 2 (9-pin)
1 x serial RS-232-C (9 pin), optional - occupies an unused slot
lan / ethernet (RJ-45)
1 x Gbit/s Ethernet (Intel Hartwell)
service lan (RJ45)
1 x dedicated Service LAN port for iRMC (10/100 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
Service LAN traffic can be switched to shared onboard Gbit LAN port
onBoaRD oR InteGRateD contRolleR
sata controller
ICH10R, 6-port SATA (4x for internal hard disks, 2x for accessible drives)
sata controller type notes
On board SATA controller supports RAID levels 0, 1, 10
Remote Management controller
Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
compatible
trusted Platform Module (tPM)
Infineon / separate module; TCG V1.2 compliant (option)
slots
PcI-express 2.0 x4 (mech. x8)
2 x full height (1x long, 1x short)
PcI-express 2.0 x8
2 x full height (1x notched, thus usable for x16 cards operating in x8 mode)
PcI-express x4 (mech. x8)
1 x full height
PcI slots
1 x
slot notes
PCI slot: 32-bit / 33 MHz, 5 V; in SAS-configurations 1x PCI-Express slot is occupied by the modular RAID-Controller
DRIve BaYs
Hard disk bay configuration
4x 3.5-inch, for SAS / SATA or 8x 2.5-inch for SAS/SATA optional
accessible drive bays
3 x 5.25/1.6-inch
notes accessible drives
All possible options described in relevant system configurator.
optional hard disk bays
2 x 3.5-inch hot-plug SAS/SATA or 8x 2.5-inch hot-plug SAS in HDD box (occupies 2x 5.25-inch bays)
Fan conFIGuRatIon
Fan configuration
2 standard fans or 2 redundant fans (only available in combination with hot plug redundant power supply)
oPeRatInG Panel
operating buttons
On/off switch
NMI button
Reset button
NMI button
Reset button
status leDs
System status (amber / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (amber / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (amber / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
service display
Optional:
ServerView Local Service Panel (LSP)
ServerView Local Service Panel (LSP)