Cisco Cisco ACE Application Control Engine Module White Paper
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 40
root@172.25.91.127‟s password:
sftp> Uploading /TN-HOME/Admin/ACE-pri_2011_09_12_23_29_09.tgz to /root/20a-
primary.tgz
/TN-HOME/Admin/ACE-pri_2011_09_12_23_29 100% 24KB 0.0KB/s 00:00
ACE-sec/Admin# copy backup-all sftp://172.25.91.127
Enter the destination filename[]? [ACE-sec_2011_09_12_26_49_09.tgz]
20b-
secondary.tgz
Enter username[]? root
Connecting to 172.25.91.127...
Warning: Permanently added „172.25.91.127‟ (RSA) to the list of known hosts.
root@172.25.91.127‟s password:
sftp> Uploading /TN-HOME/Admin/ACE-sec_2011_09_12_26_49_09.tgz to /root/20b-
secondary.tgz
/TN-HOME/Admin/ACE-sec_2011_09_12_26_49 100% 24KB 0.0KB/s 00:00
Step 3. Download the A4.2.1a version of the Cisco ACE image from Cisco.com
Stage the ACE30a (Will Be the Primary)
Step 1. Physically install a new Cisco ACE30 module into Cisco Catalyst 6500 Series chassis within the staging
area. This Cisco ACE30 module will be referenced as “ACE30a” hence forth.
Step 2. Log into the ACE from the Supervisor Engine 720 and configure an interface and IP address to allow the
ACE to connect to the backup server where the ACE10 or ACE20 backup files were stored in the
preceding staging steps. If needed, add the appropriate default route to access backup servers if they are
a hop away. Note: Neither ACLs nor management policies need to be configured because the Cisco ACE
will initialize the outgoing connections in the staging process.
preceding staging steps. If needed, add the appropriate default route to access backup servers if they are
a hop away. Note: Neither ACLs nor management policies need to be configured because the Cisco ACE
will initialize the outgoing connections in the staging process.
Step 3. Install the A4.2.1a Cisco ACE Software image on ACE30a:
switch/Admin# copy sftp://172.25.91.127 image:
Enter source filename[]? c6ace-t1k9-mz.A4_2_1a.bin
Enter the destination filename[]? [c6ace-t1k9-mz.A4_2_1a.bin]
Enter username[]? root
Connecting to 172.25.91.127...
The authenticity of host „172.25.91.127 (172.25.91.127)‟ can‟t be established.
RSA key fingerprint is 77:fd:f3:1a:7e:9f:06:7e:79:82:62:45:09:f7:db:35.