Cisco Cisco Catalyst 4000 Supervisor Engine II Bulletins
Product Bulletin
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 6
Wireless LAN Controllers
Cisco Unified Wireless Network Software Release 4.1.190.5 is supported on the following
controllers:
●
Cisco 2100 Series Wireless LAN Controller
●
Cisco 4400 Series Wireless LAN Controller
●
Cisco Catalyst 6500 Series Wireless Service Module
The Cisco Unified Wireless Network Software Release 4.1.190.5 supports wireless mesh
functionality for Cisco IOS
®
Software-based platforms in addition to platforms based on VxWorks.
For VxWorks-based platforms, Release 4.1.190.5 builds upon the features available to mesh
access points in Release 4.1.185.0. For Cisco IOS Software-based platforms, Release 4.1.190.5
provides many of the features available to VxWorks-based platforms in Release 4.1.185.0,
although some features will not be delivered until a later release.
Please refer to documentation for Release 4.1.185.0 for information about features supported by
the Cisco Unified Wireless Network.
Note that Cisco Wireless Control System Release 4.1.91 manages controllers using version
4.1.185.0 and 4.1.190.5. You do not need a separate instance of WCS to manage each controller.
Software Images
The following table lists the file name for the images associated with this release.
Table 1.
Software Images List
Products
4.1.190.5 and Related Software Images
Image
Boot Image
AP
1505
1510
1520
VxWorks
VxWorks
c1520-k9w9-tar.124-3g.JMA1
VxWorks
VxWorks
1520-boot-m.124-3g.JMA1
WLC-4400
AIR-WLC4400-K9-4-1-190-5.aes
WLC-2100
AIR-WLC2100-K9-4-1-190-5.aes
WiSM
SWISMK9-4-1-190-5.aes
WCS
WCS-STANDARD-K9-4.1.91.0.bin
or
WCS-STANDARD-K9-4.1.91.0.exe
WCS Navigator
NAVIGATOR-K9-1.0.91.0.bin
or
NAVIGATOR-K9-1.0.91.0.exe
Mesh Software Image Selection Guideline
Refer to these guidelines to determine which release is best for you.
Indoor, non-mesh APs only
Follow the Controller Main Line Release Train (e.g. 4.1.185.0, 4.2). See Mesh Software Image
Roadmap Diagram below.
Do NOT upgrade your APs to release 4.2 if you intend to use your indoor APs in mesh mode as
Enterprise Wireless Mesh APs when this feature is available in the Fall 2007 mesh release (this is