Philips 1250XD 1250X/42 User Manual

 

◗

  If you clean your razor every day, you should 

clean and refill the canister approximately every 

15 days.

C

   5 

Carefully lower the appliance back onto 

the Jet Clean canister making sure the  

release buttons snap back into place.

When the canister is filled with cleaning solution, 

do not move appliance to prevent leakage.

 

◗

  If the razor does not contain enough power  

for one (

1) shave, the Jet Clean Cleaning 

  

System may not work properly.  Charge the 

  

razor in the Jet Clean System before using the  

Jet Clean System to clean your razor.

 

◗

  If you use the razor with shaving foam, quickly 

rinse under hot water before cleaning in the 

Jet Clean System. 

 

  Connect the small plug to the Jet Clean 

System.  Connect the charging plug into 

any 100V to 240V AC outlet.  Use only the 

charging plug provided.

  

.   Place the Jet Clean System on a flat, level 

surface.  Fill the canister with cleaning 

solution (see ‘Preparing Jet Clean System 

For Use’).    

 

 

30

C

 

  Remove protective razor head cap from 

razor.   

 

 

 

C

  

  Place the razor head side down in the 

razor holder with the display facing the 

front of the Jet Clean System.  

 

C

 

  Press the razor tightly into the holder of 

the Jet Clean System to lock into cleaning 

cycle position.

The display on the razor will indicate razor is 

charging. 

 

  Model 1280XCC only, press the up/down 

button to select a cleaning program.

You can choose from 3 cleaning programs: eco 

program, auto program and intensive program. 

NOTE: The eco program has a shorter drying time 

and the intensive program is a more thorough 

cleaning program.

 

  Press the ON/OFF button to start the 

cleaning cycle.

Model 1250XCC only, the system begins the 

automatic cleaning program.  

 

 

 

31