Cisco Cisco IOS Software Release 12.2(33)SRE
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006, 2007 Cisco Systems, Inc. All rights reserved.
Suppress BGP Advertisements for Inactive
Routes
Routes
The Suppress BGP Advertisements for Inactive Routes features allows you to configure the suppression
of advertisements for routes that are not installed in the Routing Information Base (RIB). Configuring
this feature allows Border Gateway Protocol (BGP) updates to be more consistent with data used for
traffic forwarding.
of advertisements for routes that are not installed in the Routing Information Base (RIB). Configuring
this feature allows Border Gateway Protocol (BGP) updates to be more consistent with data used for
traffic forwarding.
Configuration Information
Configuration information is included in the “Configuring a Basic BGP Network” module of the
Cisco IOS BGP Configuration Guide, Release 12.4T, at the following URL:
Cisco IOS BGP Configuration Guide, Release 12.4T, at the following URL:
The following sections provide information about this feature:
•
BGP Route Aggregation
•
Aggregating Route Prefixes Using BGP
•
Suppressing Inactive Route Advertisement Using BGP
•
Aggregating Prefixes Using BGP: Examples
For a complete list of features included in the “Configuring a Basic BGP Network” module, see the
Feature Information table located toward the end of the module.
Feature Information table located toward the end of the module.
Command Reference Information
Release 12.2SR
The following commands are new or modified for this feature:
•
bgp suppress-inactive