Cisco Cisco IOS Software Release 12.2(27)SBC
Turbo Access Control List Scalability Enhancements
Configuration Examples for Turbo Access Control List Scalability Enhancements on the NSEs
13
Cisco IOS Release 12.2(31)SB2
DETAILED STEPS
Configuration Examples for
Turbo Access Control List
Scalability Enhancements on the NSEs
This section provides the following configuration examples:
•
•
•
•
•
•
•
•
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
show access-list compiled
Example:
Router# show access-list compiled
Displays the status and condition of the Turbo ACL tables
associated with each access list.
associated with each access list.
When using this command to verify memory limitation
settings for Turbo ACL processing, look at the “Mb limit”
output for both IPv4 and Data-Link. The new MB limit
setting should be listed in the “Mb limit” output for IPv4 or
Data-Link, depending on which memory limit was changed.
settings for Turbo ACL processing, look at the “Mb limit”
output for both IPv4 and Data-Link. The new MB limit
setting should be listed in the “Mb limit” output for IPv4 or
Data-Link, depending on which memory limit was changed.
For an example of the show access-list compiled command
with these outputs highlighted, see the
with these outputs highlighted, see the
.