APC Rack PDU, Basic, 1U, 16A, 208&230V AP9553 User Manual
Product codes
AP9553
APC PDU (AP9553 and AP9558): Installation Manual
5
Before You Begin
Safety and
grounding
information
grounding
information
Please read the following information before installing or
operating your
operating your
APC
Power Distribution Unit (
PDU
):
• This
PDU
is intended for indoor use only.
• Do not install this
PDU
where excessive moisture or heat
is present.
• Never install any wiring, equipment, or
PDU
s during a
lightning storm.
• Plug this
PDU
into a three-wire, grounded power outlet
only. The power outlet must be connected to appropriate
branch circuit/mains protection (fuse or circuit breaker).
Connection to any other type of power outlet may result
in a shock hazard.
branch circuit/mains protection (fuse or circuit breaker).
Connection to any other type of power outlet may result
in a shock hazard.
• Use only the supplied brackets for mounting.
• Do not use extension cords or adapters with this
• Do not use extension cords or adapters with this
PDU
.
• Do not work alone under hazardous conditions.
• Check that the power cord, plug, and socket are in good
• Check that the power cord, plug, and socket are in good
condition.
• To reduce the risk of electric shock when grounding
cannot be verified, disconnect the
PDU
from the power
outlet before installing or connecting equipment.
Reconnect to the power outlet only after making all
connections.
Reconnect to the power outlet only after making all
connections.
• Equipment must have a protective earth connector which
carries the leakage current from the load devices
(computer equipment). Do not exceed a total leakage
current of
(computer equipment). Do not exceed a total leakage
current of
3.5
mA.
Electrical
Hazard