Cisco Cisco 3365 Mobility Services Engine Release Notes

For the initial login, even if you choose Skip (S), you will be prompted to enter the password. This is 
because it is mandatory to change the root password at the initial login.

You can configure the Prime Infrastructure Communication username and password using the MSE 
setup.sh script file. 

Scenarios which you might encounter while configuring the Prime Infrastructure username and 
password are as follows:

If you configure a new Prime Infrastructure username and password, the password provided is 
applicable for the new Prime Infrastructure username created.

If you only configure the Prime Infrastructure username without configuring the Prime 
Infrastructure password, then the default password admin is applied to the configured username.

If you only configure the Prime Infrastructure password without configuring the Prime 
Infrastructure username, then the password for the admin user is changed.

If you configure an existing username for the Prime Infrastructure username and also configure the 
password, then the password for that existing user is changed. 

These users are API users, and they do not have corresponding OS users on the MSE appliance.

In some RF environments, where location accuracy is around 60 to 70% or where incorrect client or tag 
floor location map placements occur, you might need to modify the moment RSSI thresholds in the 
Context Aware Service > Advanced > Location Parameters page on the Prime Infrastructure. 

The following RSSI parameters might require modification:

locp-individual-rssi-change-threshold

locp-aggregated-rssi-change-threshold

locp-many-new-rssi-threshold-in-percent

locp-many-missing-rssi-threshold-in-percent

Contact Cisco TAC for assistance in modifying these parameters.

If you are attempting to deploy Wireless Security Module (WSM) with 3600 APs, then APs should be 
placed in monitor mode with submode wIPS and advanced wIPS engine enabled on the Prime 
Infrastructure.