Fujitsu PRIMERGY RX200 S6 VFY:R2006SF010GB Data Sheet

 Fujitsu PRiMERGY RX200 s6 Dual sockEt 1 u Rack sERvER  

Page 4 / 9

2 GB (1 module(s) 2 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
2 GB (1 module(s) 2 GB) DDR3, unbuffered, Ecc, 1333 Mhz, Pc3-10600, DiMM
2 GB (1 module(s) 2 GB) DDR3 lv, unbuffered, Ecc, 1333 Mhz, Pc3-10600, DiMM
4 GB (1 module(s) 4 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
4 GB (1 module(s) 4 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
8 GB (1 module(s) 8 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
8 GB (1 module(s) 8 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
16 GB (1 module(s) 16 GB) DDR3, registered, Ecc, 1066 Mhz, Pc3-8500, DiMM

4 GB (2 module(s) 2 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
8 GB (2 module(s) 4 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
8 GB (2 module(s) 4 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
16 GB (2 module(s) 8 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
16 GB (2 module(s) 8 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
32 GB (2 module(s) 16 GB) DDR3, registered, Ecc, 1066 Mhz, Pc3-8500, DiMM

6 GB (3 module(s) 2 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
12 GB (3 module(s) 4 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
12 GB (3 module(s) 4 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
24 GB (3 module(s) 8 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
24 GB (3 module(s) 8 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
48 GB (3 module(s) 16 GB) DDR3, registered, Ecc, 1066 Mhz, Pc3-8500, DiMM

7 x usB 2.0 (3x front, 3x rear, 1x internal)

2 x vGa (1x front)

1 x serial Rs-232-c (9-pin),  usable for iRMc or system or shared

2 x Gbit/s Ethernet

1 x dedicated service lan port for iRMc s2 (10/100 Mbit/s) 
Service LAN traffic can be switched to shared onboard Gbit LAN port

integrated RaiD 0/1 or RaiD 5/6 controller for sas base units (option, occupies one Pcie slot).
see under components RaiD controller

ich10R, 4-port for RaiD 0,1,10 (for 4x 2.5-inch hDD´s only) , 1 x sata channel for DvD

intel

®

 82575EB , 2 x 10/100/1000 Mbit/s Ethernet (i/o acceleration), vt-c (i/o acceleration and vMDq), PXE boot via lan 

from PXE server, iscsi boot (also diskless) via onboard lan

integrated Remote Management controller (iRMc s2, 32 MB attached memory incl. graphics controller), 

optional tPM

1 x low profile 

2 x (1 x full height or low profile or 1 x low profile)

Pci-Express Gen2 x 4, only for modular RaiD controller

6 x 2.5-inch or 8 x 2.5-inch

1 x 5.25/0.5-inch for cD/RW-DvD (only for option 6x 2.5-inch hD)

12

redundant hot plug fans  (5+1 redundancy)

12 fans (2x6 double fans)

on/off switch
Reset button
nMi button
iD button