Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
199
Name
Type
Input/
Output
Output
Description
remaining PTP names.
Throws
Compliance
TMF-defined.
TMF-defined.
3.8.7 getContainedInUseTPs
Synopsis
Description
This interface retrieves the in-use CTPs contained in a specific PTP, at specific layer rates. An in-use CTP
is a CTP used by an SNC in any state (including pending) or a CTP that is terminated and mapped.
Example for SONET: The NMS invokes this method on an OC3 PTP (and assumes that the NE does not
have an XCVT card, so VT-level cross-connects are not possible) with an empty layerRateList.
This interface retrieves the in-use CTPs contained in a specific PTP, at specific layer rates. An in-use CTP
is a CTP used by an SNC in any state (including pending) or a CTP that is terminated and mapped.
Example for SONET: The NMS invokes this method on an OC3 PTP (and assumes that the NE does not
have an XCVT card, so VT-level cross-connects are not possible) with an empty layerRateList.
• If there are no SNCs created, Prime Optical returns zero CTPs.
• If there is one SNC created at the STS-1 level, Prime Optical returns one CTP at the STS-1
• If there is one SNC created at the STS-1 level, Prime Optical returns one CTP at the STS-1
layer rate.
Example for SDH: The NMS invokes this method on an STM-1 PTP (and assumes that the NE does not
have an XC10G card, so VC12-level cross-connects are not possible) with an empty layerRateList.
have an XC10G card, so VC12-level cross-connects are not possible) with an empty layerRateList.
• If there are no SNCs created, Prime Optical returns zero CTPs.
• If there is one SNC created at the VC4 level, Prime Optical returns one CTP at the VC4 layer
• If there is one SNC created at the VC4 level, Prime Optical returns one CTP at the VC4 layer
rate.
Parameters
Name
Type
Input/
Output
Output
Description
tpName
globaldefs::NamingAttributes_T
In
Name of the PTP.
layerRateList transmissionParameters::LayerRateList_T
In
List of rates of the contained
actual CTPs to return. An
empty list tells the EMS to
actual CTPs to return. An
empty list tells the EMS to