Cisco Cisco Prime Optical 10.6 Developer's Guide

Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide 

 

 

206

 

 
This interface is also supported for the attribute LinkIntegrityTimer for the cards and the NE types listed 
in the following table. 
Card 

G1000_4 

X 

X 

CE-1000-4  X 

X 

 
For CE-100T-8, CE-MR-6, and CE-MR-10 cards, the LinkIntegrityTimer attribute value cannot be set to 
0. 
For G1000_4 and CE-1000-4 cards, the LinkIntegrityTimer attribute value cannot be set to 0 if the 
LinkIntegrityDisable attribute is set to false. 
For G1000_4 and CE-1000-4 cards, the LinkIntegrityTimer attribute value must be set to 0 if the 
LinkIntegrityDisable attribute is set to true. 
For G1000_4 and CE-1000-4 cards, the LinkIntegrityDisable attribute can be set only to true or false. 
For CPT 200, CPT 200 SDH, CPT 600, and CPT 600 SDH, additional connectionless TP information can 
be set. For more information, see 

. 

This operation returns a list of modified attributes with the new related values applied. 
Parameters 

tpName 

globaldefs::NamingAttributes_T  In 

Name of the TP to which to apply the list 
of modified attribute values. 

additionalInfo  globaldefs::NVSList_T 

In/out 

List of attributes that must be modified, 
as well as the new related values to 
apply. 

Throws 

Compliance 
TMF-defined. 

Synopsis 

Description 
This interface returns the TP structure for a specific TP name. 
For the PTP on protection equipment in a 1_FOR_N protection group, Prime Optical reports only the 
AlarmReporting for the LayeredParameters of that PTP.