Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
260
backward directions. To represent the total capacity of a VCAT SNC, VCATLayerRate_T
contains the following information:
contains the following information:
LayerRate_T memberRate: Layer rate of the member SNCs.
Unsigned long numberOfMembers: Number of members for the given VCAT SNC.
Unsigned long numberOfMembers: Number of members for the given VCAT SNC.
For a list of supported layer rates, see
• transmissionParameters::VCATLayerRate_T rxRate
– Supported. This field represents the total capacity the VCAT SNC can carry in the backward
direction. If the VCAT is symmetrical, this field is ignored. For a list of supported layer rates,
see
see
• transmissionParameters::LayerRate_T memberRate
– Supported. This field represents the rate of each member circuit.
• globaldefs::NamingAttributes_T aEnd
– Supported. This is an FTP representing the port at the aEnd.
• globaldefs::NamingAttributes_T zEnd
– Supported. This is an FTP representing the port at the zEnd. This field is empty for open-
ended VCAT.
• SNCType_T sncType
– Not supported.
• subnetworkConnection::LCASMode_T mode
– Supported. Prime Optical supports the following values:
LCASMode_T. LCASMODE _NONE
LCASMode_T. LCASMODE _SWLCAS
LCASMode_T. LCASMODE _LCAS
LCASMode_T. LCASMODE _SWLCAS
LCASMode_T. LCASMODE _LCAS
• subnetworkConnection::RoutingMode_T routingMode
– Supported. Prime Optical supports the following values:
RoutingMode_T. ROUTE_COMMONFIBER
RoutingMode_T. ROUTE_INDEPENDENTFIBER
RoutingMode_T. ROUTE_INDEPENDENTFIBER
• globaldefs::NVSList_T additionalInfo
– Supported. CustomerID and ServiceID are reported if they are available. The openVcat field
reports values of true or false to show whether the SNC is an open-ended VCAT.
Throws
Compliance
Prime Optical-defined.
Prime Optical-defined.
3.9.22 getAllVCATSNCs
Synopsis