Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
33
Secondary States (SST)
Attribute Value
Attribute Value
Meaning
Maintenance (MT)
The entity has been manually removed from service for
maintenance. It is still capable of performing its provisioned
functions. Traffic is still carried.
maintenance. It is still capable of performing its provisioned
functions. Traffic is still carried.
Disabled (DSBLD)
The entity has been manually removed from service and cannot
perform its provisioned functions. All of its provisioned services
are disrupted. Traffic is not carried.
perform its provisioned functions. All of its provisioned services
are disrupted. Traffic is not carried.
Loopback (LPBK)
The loopback command is in effect (any loopback type).
2.1.6.3
XTC Cards
The XTC-14 card has 14 DS1 ports numbered 1 through 14. Only VT1.5 SNCs can be created on these
ports. The XTC-28-3 card has 28 DS1 ports numbered 1 through 28 and 3 DS3 ports numbered 29
through 31. VT1.5 SNCs can be created on DS1 ports, and STS-1 SNCs can be created on DS3 ports.
ports. The XTC-28-3 card has 28 DS1 ports numbered 1 through 28 and 3 DS3 ports numbered 29
through 31. VT1.5 SNCs can be created on DS1 ports, and STS-1 SNCs can be created on DS3 ports.
2.1.6.4
PTPs
All PTPs are bidirectional for the ONS 15327. The ports are always in channelized mode. PTPs support
In Service, Out of Service, Out of Service–Maintenance, and Auto in Service values for the service state
attribute.
In Service, Out of Service, Out of Service–Maintenance, and Auto in Service values for the service state
attribute.
2.1.6.5
CTPs
All CTPs are in channelized mode for the ONS 15327. Alarm monitoring cannot be turned on or off for
CTPs.
CTPs.
2.1.6.6
SNCs
XTC cards perform STS and VT1.5 switching. The XTC cards support the total rearrangement of 192
bidirectional STSs from the four high-speed slots (1 to 4), plus 12 bidirectional STSs for XTC module
low-speed electrical interfaces. The XTC VT1.5 matrix supports the grooming of 336 bidirectional VT1.5
circuits.
The SNC name cannot exceed 48 characters.
bidirectional STSs from the four high-speed slots (1 to 4), plus 12 bidirectional STSs for XTC module
low-speed electrical interfaces. The XTC VT1.5 matrix supports the grooming of 336 bidirectional VT1.5
circuits.
The SNC name cannot exceed 48 characters.
2.1.6.7
Autodiscovery
2.1.7 ONS 15454 SDH
See the
Optical 10.6 supports.
2.1.7.1
Shelves
All supported ONS 15454 SDH NEs have exactly one shelf each, with the exception of the ONS 15454
SDH multiservice transport platform (MSTP) R7.0, which can have up to eight shelves per NE.
SDH multiservice transport platform (MSTP) R7.0, which can have up to eight shelves per NE.
2.1.7.2
Slots
The ONS 15454 SDH has one shelf view supplemented with the top subrack Electrical Facility
Connection Assembly (EFCA) shelf and bottom subrack chassis. The main shelf has 17 slots numbered 1
to 17 and contains cards that carry traffic. The EFCA shelf has 12 additional slots numbered 18 to 29 and
contains Front Mount Electrical Connection (FMEC) modules, the ALM/PWR/MIC (A/P/M) module, and
the CRFT/TMG/MIC (C/T/M) module. The Timing Communications and Control-International (TCC-I)
Connection Assembly (EFCA) shelf and bottom subrack chassis. The main shelf has 17 slots numbered 1
to 17 and contains cards that carry traffic. The EFCA shelf has 12 additional slots numbered 18 to 29 and
contains Front Mount Electrical Connection (FMEC) modules, the ALM/PWR/MIC (A/P/M) module, and
the CRFT/TMG/MIC (C/T/M) module. The Timing Communications and Control-International (TCC-I)