Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
468
• The new drop (zEnd[0]) is in an ME which is already part of the EVC. In this case, you must
not specify the EFP configuration for the internal-intermediate drops as being already
present. You need to only specify the new drop in zEnd[0] and its associated EFP parameters
in the tpsToModify parameter.
present. You need to only specify the new drop in zEnd[0] and its associated EFP parameters
in the tpsToModify parameter.
• The new drop (zEnd[0]) is in an ME which currently does not belong to the EVC. In this
case, you must specify the EFP configuration for both the external drop to be added
(zEnd[0]) and the internal-intermediate drop (zEnd[1]) in the same ME, which is used for all
the intermediate drops in the route taken by the network.
(zEnd[0]) and the internal-intermediate drop (zEnd[1]) in the same ME, which is used for all
the intermediate drops in the route taken by the network.
If the new drop is in an ME which currently does not belong to the EVC, the SID associated to the EVC
can change. If the current SID value associated to the EVC is not available in the ME of the new drop, the
network automatically picks up the first available SID shared by the current ME belonging to the EVC
and the new drop ME. The new SID value is returned by the API in the result.
The source and new endpoint EFP configuration must be the same.
The addition or deletion of drops and the modification of the administrative state are mutually exclusive.
For example, if you want to add a drop and remove another one, you must perform the modifyFDFr
operation twice with the corresponding parameters.
QoS Change
Associate the QoS parameters to a given EVC by specifying the following layered parameters (associated
to the LR_EVC layer rate) in the transmission parameters:
Name
can change. If the current SID value associated to the EVC is not available in the ME of the new drop, the
network automatically picks up the first available SID shared by the current ME belonging to the EVC
and the new drop ME. The new SID value is returned by the API in the result.
The source and new endpoint EFP configuration must be the same.
The addition or deletion of drops and the modification of the administrative state are mutually exclusive.
For example, if you want to add a drop and remove another one, you must perform the modifyFDFr
operation twice with the corresponding parameters.
QoS Change
Associate the QoS parameters to a given EVC by specifying the following layered parameters (associated
to the LR_EVC layer rate) in the transmission parameters:
Name
Type
Description
qosTableMap String QoS table map name (TC profile)
qosIngPolicy
qosIngPolicy
String QoS ingress policy map name (TC profile)
qosEgrPolicy String QoS egress policy name (TC profile)
splitHorizontal Change
Select the splitHorizontal parameter to a given EFP by specifying the following layered parameter
(associated to the LR_EVC layer rate) in the transmission parameters:
Name
splitHorizontal Change
Select the splitHorizontal parameter to a given EFP by specifying the following layered parameter
(associated to the LR_EVC layer rate) in the transmission parameters:
Name
Type
Description
splitHorizontal
Boolean
Indicates whether or not the
splitHorizontal EFP parameters
of a TP are enabled. Valid values
are:
splitHorizontal EFP parameters
of a TP are enabled. Valid values
are:
•
true
•
false
Limitations
Object modification notifications are not generated.
Object modification notifications are not generated.
4.5.5 Link Aggregation Provisioning Interfaces
This section describes the following interfaces:
•
•
•