Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
623
Step 3
Enter the following command to generate a client-side certificate that will be issued to the
server:
server:
Step 4
Verify that the certificate is stored in the ascii_client_cert file.
6.12.3 Adding the Client-Side Certificate to the Server-Side Keystore
Step 1
Enter the following command to add the client-side certificate to the server-side keystore.
(Use FTP or a similar tool to deliver the ascii_client_cert file to the server. The server-side
keystore is located in the /opt/CiscoTransportManagerServer/cfg directory on the server.)
(Use FTP or a similar tool to deliver the ascii_client_cert file to the server. The server-side
keystore is located in the /opt/CiscoTransportManagerServer/cfg directory on the server.)
The command output resembles the following example:
Step 2
Verify that the certificate issued by the client was added to the server keystore.
6.12.4 Adding the Server-Side Certificate to the Client-Side Keystore
Step 1
Enter the following command to add the server-side certificate to the client-side keystore.
(Use FTP or a similar tool to deliver the previously generated gwcorba_service_cert file
from the server. The server-side certificate is located in the
/opt/CiscoTransportManagerServer/cfg directory on the server.)
(Use FTP or a similar tool to deliver the previously generated gwcorba_service_cert file
from the server. The server-side certificate is located in the
/opt/CiscoTransportManagerServer/cfg directory on the server.)
The command output resembles the following example: