Cisco Cisco D9804 Multiple Transport Receiver Installation Guide
Setup Menu
78-4042990-01 Rev B
53
Menu Item
Description
Parameters
Recv
Indicates the number received. This is the Code
Download Table number in the file being
downloaded that is currently being received.
Although a single file is being downloaded, it
is made up of many of these tables. As a table
is received, the CDT# increases incrementally.
All of the counters are cleared when the
download has completed, is aborted or when
the receiver is power-cycled.
Download Table number in the file being
downloaded that is currently being received.
Although a single file is being downloaded, it
is made up of many of these tables. As a table
is received, the CDT# increases incrementally.
All of the counters are cleared when the
download has completed, is aborted or when
the receiver is power-cycled.
0 to 4294967295
Reject
Indicates the number rejected. This is the
rejected table count. Tables are rejected
whenever validation fails due to CRC failure or
an incorrect code or receiver type.
rejected table count. Tables are rejected
whenever validation fails due to CRC failure or
an incorrect code or receiver type.
0 to 4294967295
Command
Indicates the download command. This
command is for over-the-air downloads only.
It has no affect on the rear panel downloads.
command is for over-the-air downloads only.
It has no affect on the rear panel downloads.
Restart, abort, none
Abort - stops a download
that is currently being
received.
that is currently being
received.
Restart - restarts a
previously aborted
download.
previously aborted
download.
Note: The download does
not resume from where it
was aborted, but restarts
from the beginning.
not resume from where it
was aborted, but restarts
from the beginning.
None - no action is to be
performed.
performed.
Date Format
Sets the Date format. Current day information
is displayed in the top left corner of the LCD
front panel.
is displayed in the top left corner of the LCD
front panel.
The following formats are
supported:
YYYY_MM_DD,
DD_MM_YYY,
MM_DD_YYYY, MM_DD
or INVALID.
supported:
YYYY_MM_DD,
DD_MM_YYY,
MM_DD_YYYY, MM_DD
or INVALID.
Time Format
Sets the Time format. Time information is
normally broadcast as part of the transmitted
digital signal. It is usually the broadcaster’s
local time relative to GMT (Greenwich Mean
Time). Current time information is displayed
in the top left corner of the LCD front panel.
normally broadcast as part of the transmitted
digital signal. It is usually the broadcaster’s
local time relative to GMT (Greenwich Mean
Time). Current time information is displayed
in the top left corner of the LCD front panel.
The following formats are
supported: 24Hr, 24Hr
SuspendZero (the leading
zero is dropped from the
time), 12Hr, 12Hr
SuspendZero (the leading
zero is dropped from the
time).
supported: 24Hr, 24Hr
SuspendZero (the leading
zero is dropped from the
time), 12Hr, 12Hr
SuspendZero (the leading
zero is dropped from the
time).