Cisco Cisco Digital Service Access Node (DSAN) 8200 Installation Guide
Chapter 3 Hardware Installation
40
OL-29943-01
2 Insert the coaxial connector into the housing at the desired housing port. The tip
of the pin should engage the spring-loaded seizure.
Note: It may help to twist the connector back and forth slightly while pressing in
against the seizure to get the tip of the pin to engage.
Note: It may help to twist the connector back and forth slightly while pressing in
against the seizure to get the tip of the pin to engage.
3 Tighten the connector nut according to manufacturer specifications.
Note: When using a small connector, use a 3/4-inch socket for increased leverage
when tightening the connector nut.
when tightening the connector nut.
4 Repeat steps 1-3 above for each coaxial port used.