Cisco Prisma II bdr Dig Rev 2 1 Dual Mux Sys for High Density Installations Installation Guide
4-20
Operation Using the LCI Software
78-715192-01 Rev C
Configuring the bdr Transmit Processor,
Continued
Configuring Parameters
To configure the parameters, follow these steps.
1.
Access the Device Details window. The Device Details window displays.
2.
Under Controls, double-click the parameter you want to configure.
Result: The Change Value dialog box displays. The graphic below shows the
Result: The Change Value dialog box displays. The graphic below shows the
dialog box for the Redundant Mode parameter.
3.
Depending on the parameter you chose, select or type a new value.
4.
Click Execute.
Result: The new value displays next to the parameter.
Result: The new value displays next to the parameter.