Cisco Model D9477 MQAM Modulator Installation Guide
Select an RF Module
78-717866-01 Rev D
61
Select an RF Module
The RF SEL key allows you to select the default screens for each of the RF Modules
(channels).
Selecting an RF Module
Follow these steps to change the selected RF Module.
1 Press the RF SEL key on the front panel of the MQAM. The Default Status screen
1 Press the RF SEL key on the front panel of the MQAM. The Default Status screen
changes to the next available RF Module.
2 Press the RF SEL key to scroll through the list of RF Modules until you select the
desired module.
Note: The selected RF Module is saved as the Default Status screen.
Note: The selected RF Module is saved as the Default Status screen.