Moxa UPort 1150I UPORT 1150I Leaflet
Product codes
UPORT 1150I
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industrial USB
UPort® 1150I
Compatible with USB 2.0
›
12 Mbps USB data rate
›
15N high retention USB type B connector
›
Software selectable RS-232, RS-422, 4-wire RS-485, and
›
2-wire RS-485
Drivers provided for Windows, WinCE, and Linux
›
15 KV ESD protection for all serial ports
›
2 KV optical isolation protection
›
Full modem status LEDs
›
1-port RS-232/422/485 USB-to-serial converter with 2 KV isolation
USB Interface
Compliance: USB 1.0/1.1 compliant, USB 2.0 compatible
Connector: USB type B
Speed: 12 Mbps (Full-Speed USB)
Connector: USB type B
Speed: 12 Mbps (Full-Speed USB)
Serial Interface
Number of Ports: 1
Serial Standards: RS-232/422/485
Connector: DB9 male
Serial Standards: RS-232/422/485
Connector: DB9 male
Serial Line Protection
ESD Protection: 15 KV embedded
Optical Isolation: 2 KV
Optical Isolation: 2 KV
Performance
Baudrate: 50 bps to 921.6 Kbps
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
FIFO: 64 bytes
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
FIFO: 64 bytes
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-2w: Data+(B), Data-(A), GND
RS-485 Data Direction: ADDC® (Automatic Data Direction Control)
RS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-2w: Data+(B), Data-(A), GND
RS-485 Data Direction: ADDC® (Automatic Data Direction Control)
Driver Support
Operating Systems: Windows 9X/ME/2000, Windows XP/2003/
Vista/2008/7 x86/x64, WinCE 5.0/6.0, Linux 2.4, Linux 2.6 x86/x64
Vista/2008/7 x86/x64, WinCE 5.0/6.0, Linux 2.4, Linux 2.6 x86/x64
Note: Please refer to Moxa’s website for the latest driver support information.
Physical Characteristics
Housing: SECC sheet metal (1 mm), IP30 protection
Weight:
Product only: 75 g (0.65 lb)
Packaged: 320 g (0.72 lb)
Dimensions: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
Weight:
Product only: 75 g (0.65 lb)
Packaged: 320 g (0.72 lb)
Dimensions: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
Environmental Limits
Operating Temperature: 0 to 55°C (32 to 131°F)
Operating Humidity: 5 to 95% RH
Operating Humidity: 5 to 95% RH
The UPort® 1150I is a USB-to-serial converter with one 3-in-1 RS-
232/422/485 serial port, transmission speed up to 921.6 Kbps, and
15 KV ESD protection. For industrial and commercial applications that
require enhanced reliability, it is also equipped with 2 KV DC optical
isolation protection, providing PCs with both COM port expansion and
232/422/485 serial port, transmission speed up to 921.6 Kbps, and
15 KV ESD protection. For industrial and commercial applications that
require enhanced reliability, it is also equipped with 2 KV DC optical
isolation protection, providing PCs with both COM port expansion and
protection from potentially damaging electrical spikes. Adjustable
RS-485 pull high/low resistors are built in for daisy-chained RS-485
networks, allowing engineers to connect to any serial device quickly
and easily.
RS-485 pull high/low resistors are built in for daisy-chained RS-485
networks, allowing engineers to connect to any serial device quickly
and easily.
Many engineers use a combination of USB-to-serial converter
plus mini tester to check serial device connections during routine
inspections. However, mini testers are inconvenient to use, particularly
when you need to connect directly through a device’s DB9 connector,
and purchasing mini testers for all inspectors in a factory increases
the overall operating expense. To get around these problems, Moxa
designed the UPort® 1150I, which is an external USB-to-serial
plus mini tester to check serial device connections during routine
inspections. However, mini testers are inconvenient to use, particularly
when you need to connect directly through a device’s DB9 connector,
and purchasing mini testers for all inspectors in a factory increases
the overall operating expense. To get around these problems, Moxa
designed the UPort® 1150I, which is an external USB-to-serial
converter with 1 RS-232/422/485 DB9 connector and a built-in mini
tester. The UPort® 1150I has the following features:
tester. The UPort® 1150I has the following features:
USB 2.0 compatibility
•
RS-232 and RS-422/485 interfaces
•
Built-in mini tester function
•
Built-in modem status LED indicators for easy diagnosis
•
Competitive pricing
•
Specifications
Overview
Typical Application—Mini Testers