Samsung HT-H4500R User Manual
|
2
English
Safety Information
WARNING
•
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
expose this appliance to rain or moisture.
CAUTION
•
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
•
The Mains plug is used as a disconnect device and
shall stay readily operable at any time.
shall stay readily operable at any time.
•
This apparatus shall always be connected to an AC
outlet with a protective grounding connection.
outlet with a protective grounding connection.
•
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates
“dangerous voltage” inside the
product that presents a risk
of electric shock or personal
injury.
“dangerous voltage” inside the
product that presents a risk
of electric shock or personal
injury.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
This symbol indicates
important instructions
accompanying the product.
important instructions
accompanying the product.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
PRODUCTO
LASER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO
BEAM.
INTERLOCKS DEFEATED, AVOID EXPOSURE TO
BEAM.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on
the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the
plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the
fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension
lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then
safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible
cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN
or RED.
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on
the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the
plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the
fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension
lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then
safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible
cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN
or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR BY THE EARTH
SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
HT-H4500R-XU-1211.indd 2
HT-H4500R-XU-1211.indd 2
2014/1/24 10:25:41
2014/1/24 10:25:41