Samsung HT-H4500R User Manual

| 

  English

Settings

Prevents playback of Blu-ray Discs 
with a rating equal to or above a 
specific age ratings unless the PIN 
is entered.

Prevents playback of DVDs with a 
rating above a specific numerical 
ratings unless the PIN is entered.

Change the 4-digit PIN used to 
access security functions.

You can specify the time zone 
that is applicable to your area.

For more information about the 
Software Upgrade function, see 
"Upgrading Software" on page 
21.

Provides contact information for 
assistance with your product.

View the general disclaimer 
regarding third party contents 
and services.

All settings will revert to the 
default except for the network 
settings. The default security 
password is 0000.

When you connect this product to a network, you 
can use network based applications and functions 
such as BD-LIVE and upgrade the product's software 
through the network connection.

Before you begin, contact your ISP to find out if your 
IP address is static or dynamic. If it is dynamic, we 
recommend you use the Automatic procedure below. 
If it is static, you must use the Manual procedure that 
follows.

• 

Before you begin, confirm that the product is 
connected to your router with a network cable.

 

❑

To start the configuration process, follow these steps:

1. 

In the Home menu, select Settings, and then 

press the E button. 

2. 

Select Network, and then press the E button.

3. 

Select Wired Network Settings, and then press 

the E button. 
The Wired Network Settings screen appears.

4. 

Press the 

►

 button on the Internet Protocol 

Setup menu.
Use 

▲▼

 button to select Auto, and then press 

the E button.

5. 

The Network function acquires and fills in 

the values for IP Address, Subnet Mask, etc., 
automatically.

6. 

After the Network function has acquired the 

network values, press the RETURN (') button.

7. 

Select Network Test, and then press E. The 

home cinema validates the network connection. 
When it is done, press the RETURN (') button.

 

❑

If you have a static IP address or the Automatic 
procedure does not work, you’ll need to set the 
Network Settings values manually.

       

etwork Settings values manually.

   

 

> Move  " Select 

'

 Return

8. 

Follow the first four steps in the Automatic 

procedure, but select Manual instead of Auto in 
Step 4.

9. 

Press the 

▼

 button to go to the first entry field (IP 

Address).

10. 

Use the number buttons on your remote to enter 

numbers.

 

> Move  " Select 

'

 Return

HT-H4500R-XU-1211.indd   20

HT-H4500R-XU-1211.indd   20

2014/1/24   10:26:12

2014/1/24   10:26:12