Samsung Q9000 ميموري User Manual
23
EN
G
LIS
H
Setting the On/Off timer
You can set the air conditioner to turn on/off automatically at desired time.
Setting On timer while the air conditioner is off / Off timer while the air conditioner is on.
Setting On timer while the air conditioner is off / Off timer while the air conditioner is on.
Lighting
<Setting On timer>
<Setting Off timer>
Lighting
1. Press the On timer or Off timer button.
f
f On/Off timer indicator will blink on the remote controller display.
2. Press the On timer or Off timer button repeatedly to set the time.
2. Press the On timer or Off timer button repeatedly to set the time.
f
f You can set the time in half hourly units from 30 minute ~ 3 hours and hourly units
from 3 hour ~ 24 hours.
f
f The set hour is set to minimum 30 minutes and maximum 24 hours.
3. Press the Set/Cancel button to activate it.
3. Press the Set/Cancel button to activate it.
f
f On/Off timer indicator will stop blinking and the set time will be displayed.
f
f
icon appears in the display of the indoor unit and timer setting will be completed.
f
f If you don't press the Set/Cancel button within 10 seconds after selecting the On/
Off timer function, the air conditioner will return to the previous status, so you should
check the On/Off timer indicator on the remote controller display or
check the On/Off timer indicator on the remote controller display or
icon on the
indoor unit display.
Cancel
Press the Set/Cancel button once again.
Additional options available in On timer mode
You can select from Auto Cool Dry Purity Heat.
When setting the on timer with Heat mode, the air conditioner will operate with
Auto mode.
When setting the on timer with Heat mode, the air conditioner will operate with
Auto mode.
You can adjust the temperature in Auto/Dry mode. Operation mode will change
to Cool mode if you press the Temp + or - button in Auto mode, and you cannot
adjust the temperature during Purity mode.
to Cool mode if you press the Temp + or - button in Auto mode, and you cannot
adjust the temperature during Purity mode.
You cannot adjust the fan speed.
• Only the latest setting timer will be applied between the On Timer/Off Timer
and good'sleep functions.
• About 10 seconds after setting the On timer, only the On timer indicator will
appear on the remote controller display.
• If you press the Power button on the indoor unit after setting the On timer
function with the remote controller, Timer indicator on the indoor unit display
will disappear and the function will be canceled. However, Timer indicator on
the remote controller will remain on but the function will not work.
will disappear and the function will be canceled. However, Timer indicator on
the remote controller will remain on but the function will not work.
NOTE
사우디,인도,나이지리아향 FAC MEMORY 냉방_IBIM_EN_04773A-00.indd 23
2014-09-11 오후 1:16:07