Samsung 40W 2.1Ch Multimedia Speaker K20 User Manual
· 7 · English
AUX IN 2: Connecting an External Analogue Component
Analogue signal components such as a TV or Source Device.
1. Connect AUX IN 2 (Audio) on the rear of the product to the Audio Out of the external analogue component.
1. Connect AUX IN 2 (Audio) on the rear of the product to the Audio Out of the external analogue component.
• Be sure to match connector colours.
Audio Cable (not supplied)
If the external analogue component has only
If the external analogue component has only
one Audio Out, connect either left or right.
Listening to the Music
You can listening to the music from a device connected to AUX IN 1 or AUX IN 2.
1. Switch the system on by pressing the POWER ( ) button.
2. The music of the source device will be played automatically.
3. Adjust the volume by tuning the VOLUME control on the product.
1. Switch the system on by pressing the POWER ( ) button.
2. The music of the source device will be played automatically.
3. Adjust the volume by tuning the VOLUME control on the product.
To adjust the low tone:
Adjust the bass level by tuning the BASS level control on the product. Set the bass volume to an
Adjust the bass level by tuning the BASS level control on the product. Set the bass volume to an
undistorted level to prevent system damage.
To adjust the high tone:
Adjust the treble level by tuning the TREBLE level control on the product.
To adjust the high tone:
Adjust the treble level by tuning the TREBLE level control on the product.
• If the source device has a bass boost function or equaliser function, set to off. If there functions are on,
sound may be distorted.
• If the system volume is high, depending on the volume setting, the operation software, and the devices
being connected, the speaker sound may be paused. This is caused by the protection circuit, and is not a
malfunction. Turn down the volume of the system or the source device.