millennium-technologies millennium Manual

Analog I/O :

6 inputs, 6 outputs; standard RCA type connectors

Coaxial digital input:

1) AES consumer standard (RCA), 0.5Vp-p/75 ohm

Optical digital input:

1) TOSLINK

Coaxial digital output:

AES consumer standard (RCA), 0.5Vp-p/75 ohm
(works with either digital input)

Analog outputs:

Standard line level
(2Vrms at 0dB into 1K ohm (min.) load)

Analog inputs:

Standard line level
(2Vrms at 0dB into 50K ohm (min.) load)

DTS Decoder:

Motorola 56009 DSP (upgradable)

D-to-A Converter:

3) stereo 20 bit Delta Sigma DACs

Digital Filter:

8X interpolation, and .008 dB ripple

Frequency range:

10Hz to 20KHz

Frequency response:

± 0dB 10Hz to 20Khz (pass through mode)
-2.5dB @ 20KHz (DTS Decode mode
with proprietary re-equalization curve implemented)

LFE frequency response:

± 0dB 10Hz to 80Hz
- 6.5dB @120Hz

Signal to Noise ratio:

110dB

TRIM range:

±15dB minimum

MASTER level:

AUTO mode

±30dB minimum (offset range)

MANUAL mode

0dB fully clockwise; no output fully counter clockwise

Power requirement:

12V, 800mA (max) DC Supply
(supplied for most countries).

Power connector:

5.5 x 2.1mm center positive “barrel” connector, 
located on rear panel; fits mating connector on power 
supply.

Power fusing:

Automatically resetting circuit protector

Dimensions:

17” W x 6.5” D x 2” H 
Unit optionally mounts in standard 19” rack,
using 1 RU of vertical space

Weight:

6.8 lbs. without rack mount bracket

DTS Decoding under license from DTS Technology LLC, US Patent Number 5,451,942

Modifications may be made from to time to time without prior notice in order to insure the highest standards
and performance. Specifications and appearance may differ from those listed or shown.

Designed and Engineered in the USA    

U.S. and Foreign Patents Pending