Cadillac 2007 escalade User Manual
1. Put the tire (H) on the ground at the rear of the
vehicle with the valve stem pointed down and
to the rear.
to the rear.
2. Tilt the tire
retainer (G)
downward and
through the
wheel opening.
Make sure the
retainer is fully
seated across
the underside
of the wheel.
downward and
through the
wheel opening.
Make sure the
retainer is fully
seated across
the underside
of the wheel.
3. Assemble the two jack handle extensions (D)
and wheel wrench (E) as shown.
4. Insert the open end
of the extension (J)
through the hole
in the rear
bumper (I) (hoist
shaft access hole).
through the hole
in the rear
bumper (I) (hoist
shaft access hole).
5. Raise the tire part way upward. Make sure the
retainer is seated in the wheel opening.
6. Raise the tire fully against the underside of
the vehicle by turning the wheel wrench
clockwise until you hear two clicks or feel it
skip twice. You cannot overtighten the cable.
clockwise until you hear two clicks or feel it
skip twice. You cannot overtighten the cable.
489