eutech-instruments cyberscan ph 110 phmvrs232 meter User Manual

Instruction Manual   

 

CyberScan pH 11 / 110  

 

3

 

 A large membrane keypad

 

makes the instrument easy to use. Each button, when 

pressed, has a corresponding graphic indicator on the LCD (Figure 2 on previous 
page). Some buttons have several functions depending on its mode of operation.  

FUNCTION 

 

•  ON/OFF - Powers on and shuts off the meter. The meter will start in a 

measurement mode similar to the last measurement mode it is in before 
being switched off. 

 

•  CAL - Activates the pH or Relative mV calibration mode and when used 

with the MODE key, it activates the temperature calibration mode. 

•  MEAS - Allows return to measurement mode when canceling or terminating 

any operation. 

 

•  HOLD - Activates/Deactivates freezing of the measured reading while in 

measurement mode. 

•  ENTER - Confirms the calibration values in Calibration mode and the 

selection in SETUP and Print Function mode. 
Scroll through the memory location and the stored data during memory 
recall. 

 

 

•  MI (Memory Input) - Captures the measured readings of the pH, Relative 

mV or mV with its corresponding temperature values and stores them in 
the memory. 

•  MR (Memory Recall) - Retrieves the stored data from memory. 
•  ▲▼ - Sets the calibration values during Relative mV or temperature 

calibration. 
Scrolls through each SETUP and its sub group menu. 
Scroll through Print Function menu and its parameters. 

 

•  SETUP - Activates the parameter setting menu to allow you to customise 

meter configuration, view calibration points and electrode offset data, 
select auto power off, reset meter, and clear memory. 

 

•  MODE - Selects the measurement parameter option between pH with 

temperature, Relative mV with temperature (only pH 110), and mV with 
temperature. 

 

(pH 110) 

•  PRINT - Allows print of current measurement or stored data to either the 

printer or the computer.