Apple macintosh performa 6200cd series User Manual

m

The signal to open the tray may not be reaching the computer. Turn off
your computer and locate the small pinhole to the lower right of the 
CD-ROM tray opening. Insert the end of a large straightened paper clip
firmly and horizontally into the pinhole. Push gently until the tray is
released, then carefully pull the tray open. Do not force the tray open; wait
until the paper clip has dislodged it or you may break the front of the tray.

If neither of these suggestions works, your CD-ROM drive may be damaged.
Contact an Apple-authorized service provider or Apple for further assistance.

m

Your computer may be trying to start up from the CD-ROM disc. Press the
Open/Close button of your CD-ROM drive to open the tray, and remove
the CD-ROM disc. Close the tray, then restart your computer.

m

Make sure that the disc label is facing up and the disc is centered in the
tray. If you’re using a small (8 cm) disc, make sure it is within the tray’s
inner ring.

m

Make sure the tray is closed all the way.

m

Try restarting your computer.

Turn off your computer before you attempt to eject the tray

using a paper clip. If you don’t, you may damage the CD-ROM drive.

Chapter 6