Apple emac ati usb2 2005 Service Manual
eMac ATI Graphics/ USB 2.0/2005 Take Apart - 101
Modem (eMac USB 2.0)
Procedure
1.
Disconnect the RJ-11 cable (#1) from the top of the modem. Remove the two modem
screws (#2) and gently pry the board off its connector.The board is fragile; pry the
board from the top and bottom.
Replacement Note: When replacing the modem, don’t apply pressure to the middle of the
board. The board should be pressed into place by holding the modem by the top and
bottom.