Apple emac ati usb2 2005 Service Manual
16 -
eMac ATI Graphics/ USB 2.0/2005 Take Apart
Faraday Plate
Procedure
1.
Remove the four screws on the Faraday plate.
Replacement Note:
Note the position
of the gray cable (see red arrow) on the top left side of the Faraday plate. Be careful
the cable doesn’t get pinched when the Faraday plate is replaced.
2.
Gently pry the top half of the Faraday plate away from the chassis in the direction of
the arrows.
Note:
The gray cable (on left) rests in a groove under the Faraday plate.