Apple power mac g5 late 2004 Mounting Instructions
Power Mac G5 Hard Drive Guide Screws -
5
3. Pull the drive out of the drive bay.
(Figure 5)
Important:
If the printed circuit board (PCB) is exposed on the bottom of the hard
drive, hold the drive by its sides. To avoid damaging the replacement drive, take care
not to touch the PCB when removing or installing the drive.
not to touch the PCB when removing or installing the drive.
Figure 5
4. Remove the four guide screws from the sides of the hard drive.
(Figure 6)
Figure 6
5. Repeat steps 1–4 for the bottom drive, if installed.