Apple powerbook g4 gigabit ethernet Mounting Instructions

Page of 10
 
073-0634 Rev. A
 
 
 
 
PowerBook G4 (Gigabit Ethernet)
 
Modem
 
Replacement Instructions
 
Follow the instructions in this sheet carefully. Failure to follow these instructions could 
damage your equipment and void its warranty.
 
Note:
 
 Written and video instructions covering customer-installable parts are available at 
http://www.info.apple.com/installparts/.
 
Warning: During this procedure, keep small parts away from children.
 
Tools Required
 
• Jeweler’s flat-blade screwdriver (if keyboard is locked)
• 5 mm wrench, 5 mm socket wrench, or needle nose pliers
 
Opening the Computer
 
Warning: Always shut down your computer before opening it to avoid damaging its 
internal components or causing injury. After you shut down the computer, the 
internal components can be very hot. Let the computer cool down before 
continuing.
 
1.
Place your computer on a clean, flat surface.
2.
Shut down your computer and wait thirty minutes before continuing. 
3.
Disconnect the power cord and any other cables connected to the computer.