Apple power mac g5 late 2004 Mounting Instructions
Power Mac G5 Air Deflector -
3
Removing and Installing the Air Deflector
1.
Remove the original air deflector and place it on a soft, clean cloth.
(Figure 3)
Figure 3
2.
Install the replacement air deflector by inserting the three tabs on the bottom edge of
the deflector into the three slots in the bottom frame of the enclosure. Then swing the
deflector up flush against the top frame.
Important:
Always remember to replace the air deflector after you have finished
working inside your computer. The Power Mac G5 computer will not function properly
if the air deflector is not replaced.
Closing the Computer
1.
Replace the access panel.
Note:
Make sure the latch is in the up position before replacing the access panel. If
the latch is down, the access panel will not seat correctly in the enclosure.
2.
Push the latch down to close and secure the access panel.
Warning:
Never turn on the computer unless all of its internal and external parts are
in place and it is closed. Operating the computer when it is open or missing parts can
damage it or cause injury.