abit AN9 32X User Manual
Hardware Setup
AN9 32X
2-19
2.6.2 Serial ATA Connectors
Each SATA connector serves as one single channel to connect one SATA device by a thin SATA
cable.
cable.
• SATA1~SATA6: Available for RAID 0, RAID 1, RAID 0+1, RAID 5, or RAID 10
configuration by the utility “Intel Matrix Storage Manager”.
• SATA7、eSATA1: Available for RAID 0 or RAID 1 configuration by the utility “Sil3132 SATA
RAID Driver”.
To connect SATA device:
1. Attach either end of the signal cable to
the SATA connector on motherboard.
Attach the other end to SATA device.
Attach the other end to SATA device.
2. Attach the SATA power cable to the
SATA device and connect the other end
from the power supply.
from the power supply.
※ The motherboard in this illustration is served for DEMO only, may not be the
same type or model as the one described in this user’s manual.