abit at8 User Manual
BIOS Setup
3-21
3-6. Power Management Setup
Phoenix – Award WorkstationBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type
S1(PO5)
Item Help
Soft-Off by PWR-BTTN
Instant-Off
► PowerOn/WakeUp Function
Press Enter
AMD K8 Cool’n’Quiet Control
Auto
PWRON After PWR-Fail
Off
↑↓
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type:
This item selects the type of Suspend mode.
This item selects the type of Suspend mode.
[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
Soft-Off by PWR-BTTN:
Two options are available: Delay 4 Sec or Instant-Off. The default setting is Instant-Off. It is activated
when the user presses the power button for more than four seconds while the system is in the working
state, then the system will transition to the soft-off (Power off by software). This is called the power
button over-ride.
Two options are available: Delay 4 Sec or Instant-Off. The default setting is Instant-Off. It is activated
when the user presses the power button for more than four seconds while the system is in the working
state, then the system will transition to the soft-off (Power off by software). This is called the power
button over-ride.
# PowerOn\WakeUp Function:
Click <Enter> key to enter its submenu:
Phoenix – Award WorkstationBIOS CMOS Setup Utility
Power Management Setup
WakeUp\PowerOn by PCI Card
Disabled
Item Help
Resume by USB
Disabled
Resume by Alarm
Disabled
X - Date(of Month) Alarm
0
X - Time (hh:mm:ss) Alarm
0 : 0 : 0
POWER ON Function
BUTTON ONLY
X - KB Power ON Password
Enter
X - Hot Key Power ON
Ctrl-F1
↑↓
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
User’s Manual