ADDER x100 User Manual

1  Place the X100 module adjacent to the remote user location. 
2  Attach the video monitor, keyboard, mouse (and, optionally for X100A 

and X100AS users, speaker) connectors to the sockets of the Adder X100 
module.

3  Attach the connector of the cable run leading from the CAM to the  

 socket of the X100.

4  (X100A and X100AS models only) Insert the speaker connector to the light 

green coloured socket situated between the link connector and the power in 
socket.  

5  Insert the output connector of the power supply into the socket at the front 

edge of the X100 module labelled 

POWER

. 

6  Insert the IEC connector of the supplied power lead into the corresponding 

socket of the power supply. Connect the other end of the power lead to a 
nearby mains socket.

7  Where necessary, use the in-built video compensation feature to eliminate 

any effects caused by the cable run. See