Audiovox 50-0301x-002 series User Manual

                                                                                                4

5.  Remove and discard (2) two screws from the left 

side of VCP.  See Figure 4.        
   

6.  Insert VCP into mounting bracket (item 3 pg 2) as 

shown in  Figure 5. Route wiring through opening 
in VCP bracket. Connect all wiring to VCP per 
instructions  included with video system. 

7.  Check function of all components.  See operating 

instruction for video system operations check.  For 
further assistance, refer to the video system manual 
for the technical support phone number listed for 
your area. 

8.  Secure VCP to mounting bracket using (2) two # 8 

X 3/4" screws (item 2 pg 2) into original holes in 
VCP. Do not overtighten screws. See Fig. 5. 

 
 

 
 
 
 
 
 
 
 

9.  Place VCP housing (item 4 pg 2) over VCP. 

Lightly mark the location where housing mates 
to side panel. Remove VCP housing.  

 

 

 

FIGURE 4 

FIGURE 5 

FIGURE 6