Audioline sensor 500 User Manual

Ten ‘One-touch’ speed dial memories are available. Memories 1 & 2,  6 & 7 have
been pre-programmed for easy access to and set of for select services. If
required these memories can be re-programmed with numbers of your own
choice following the procedure below.

Memroy 1 = Call waiting answer / Call hold
Memory 2 = Stop your telephone number being displayed for this call
Memory 6 = Program call foward always
Memory 7 = Turn Call foward always off

1. Press          .

2. Dial the phone number to wish to store (16 digits maximum).

3. Press and release          .

4. Enter a (15 letters maximum) by pressing the relevant keypad digit buttons

once or several times (see page 13)
- If the same letter is you want to go to the next position press          .
- For edit, press         .
- To make a space, press 0.

5. Press and release the required speed-dial key to store the entry.

If you want to erase a speed-dial number, replace it with a new number.

1. Press and release the desired speed-dial key. The number is dialled

automatically.

2. Lift the handset when the other person answers (or use a headset).

It’s also possible to lift the handset first and then press the speed-dial key.

When any of the numbers that are stored in the one touch memories call you,
an alternative ringer tone is heard, this feature allows you to distinguish between
callers, without looking at the display.