AirLive nas-235 User Manual
5. Administration
63 AirLive NAS-235 User’s Manual
Data
Disk Mode
This indicates the current working mode of Internal Disks. It can be
one following modes:
one following modes:
Separate Disks
Disk 1 and Disk 2 work separately (Recommended) .
Disk 1 and Disk 2 work separately (Recommended) .
JBOD/LVM
Disk 1 and Disk 2 are bound into one logical volume. Total
capacity is equal to the capacity of the existing drive(s). To
work in this configuration, at least one drive must exist. If this
configuration is selected with only one drive installed, the
second drive will be configured to extend the capacity of the
logical volume when it is installed.
Disk 1 and Disk 2 are bound into one logical volume. Total
capacity is equal to the capacity of the existing drive(s). To
work in this configuration, at least one drive must exist. If this
configuration is selected with only one drive installed, the
second drive will be configured to extend the capacity of the
logical volume when it is installed.
Mirroring (Raid 1)
Disk 1 is mirrored into Disk 2. Total capacity is equal to the
capacity of smaller drive. To select this mode, both drives must
exist.
Disk 1 is mirrored into Disk 2. Total capacity is equal to the
capacity of smaller drive. To select this mode, both drives must
exist.
Striping (Raid 0)
Disk 1 and Disk 2 are striped into one logical volume. Total
capacity is equal to two times the smaller capacity of the two
drives. To select this mode, both drives must exist.
Disk 1 and Disk 2 are striped into one logical volume. Total
capacity is equal to two times the smaller capacity of the two
drives. To select this mode, both drives must exist.
Format
This includes status of Internal Disk and USB Disks.
Internal Disk:
Internal Disk:
No Installed - No disk is inserted, or connection or disk has
failed.
failed.
Not Formatted - Disk has been detected, but it is not ready for
use. Use the "Format" button to prepare the disk for use.
use. Use the "Format" button to prepare the disk for use.
Formatting - This message will only be displayed after you
have clicked the "Format" button. (See below for details of this
button.)
have clicked the "Format" button. (See below for details of this
button.)
Formatted - Disk is ready for use.
USB Disks:
No Installed - No disk is inserted into this USB port.
Not Formatted - This USB disk hasn't been formatted into FAT
or NTFS file system. You can click "Format" button to format it.
or NTFS file system. You can click "Format" button to format it.
Formatted - Disk is ready for use.