AirLive ov-110 Data Sheet

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan

- IEEE802.3 10BASE-T
- IEEE802.3u 100BASE-TX/100BASE-FX
- IEEE802.3x Flow Control and Back pressure

- Fiber: Duplex ST/SC, Simplex SC (WDM single 

mode)

- RJ-45 Socket: CAT-3/5 (10/100Mbps) Twisted Pair 

cable

  - Auto MDI/MDI-X
  - Auto-Negotiation Function

- Store and forward switch architecture.
 

- Fiber Core: Multi-Mode (62.5/125um, 50/125um), 

Single-Mode (9/125μm)

- Wavelength:
  - 1310nm (Multi-mode, Single mode)

  - 1550nm(WDM, TX), 1310nm(WDM, RX)
- Fiber Distance:
  - Multi-Mode Fiber: 2KM
  - Single-Mode Fiber: 60KM
  - WDM (Single-Mode): 20KM

- 64 to 1518 Bytes for Non-VLAN Ethernet packet

- UTP→Fiber: If UTP port link down, then converter 

will forced fiber to link down.

- Fiber→UTP: If Fiber port link down, the media 

converter will force UTP port to link down.

- DIP Switch 1: UTP Auto-Nego / 100Mbps Full Duplex 

mode

- DIP Switch 2: Fiber Full/Half Duplex
- DIP Switch 3: LLF (Link Lose Forwarding) Disable/

he OV-110 Series is a cost-effective solution 
for the converting between 10/100Base-

TX and 100Base-FX cabling, it allows you to 
extend the cabling distance of your 100Base-FX 
network up to 2 kilometers for multi-mode fiber or 
60 kilometers for single-mode fiber. The OV-110 
Series gives you the option to choose from SC/
ST multi- mode fiber connector and SC single-
mode fiber connector. The Fast Fiber Converters 
provides you with one Fiber connector for your 
fiber optic cable and one Ethernet RJ-45 port (Auto 
MDI/MDIX) for your 100BaseTX copper cable 
connection. There are 4 DIP- switches to set the 
operation mode for UTP, Fiber ports and link loss 
forwarding function.