australian-monitor tx8201 Brochure

8 Channel Stereo Mic/Line Mixer

with Direct Outputs

TX8201

Description

The TX8201 is a high performance 8 channel stereo mixer suitable for desk or rack mounting.

Inputs and Outputs

The TX8201 has six active balanced mic/line inputs and two stereo line inputs. Each channel

features recessed treble, bass and pan controls. Mic/Line level can be adjusted per channel via

a dip switch. All mic and line input connections are via 3 pin XLR female sockets, and all stereo

line input connections are via dual female RCA sockets. Both the Left and Right outputs are

balanced and feature 3 pin male XLR sockets. A stereo tape output using dual female RCA

sockets is also provided. A 1/4” stereo headphone socket is included on the front panel. The

rear panel includes a terminal block for activation of the Tone Generator. The first six channels

feature a line level direct output which can be used to feed additional amplifiers, mixers or

recording devices. An internal jumper allows the first six inputs to be removed from the mas-

ter left/right outputs whilst still retaining their direct output function.

Controls and Metering

Front panel controls include Master Left and Right Outputs plus individual channel level con-

trols. Each channel also features a recessed, screwdriver adjustable treble, bass and pan con-

trol. A four position dip switch (mic/line, phantom power, routing) is provided for the first six

channels. A 7 segment LED meter is provided for both the Left and Right Outputs. A power

“on” orange LED is part of the LED meter.

Muting

Muting is standard on the unit for channels one and two. Both channels have equal priority

and will mute channels 3-8 when signal is present. The muting function can be disabled by

moving an internal jumper.

Tone Generators

Bell, Pre-Announce Chime, Evacuate and Alert are included in the unit. The Evacuate and Alert

tones comply with Australian Standard AS2220.1. Each tone can be activated by a simple con-

tact closure using the rear panel terminal block.

Phantom Power

Phantom Power (15V DC) is available on all mic inputs and can be disabled if need be via a 

dip switch.