australian-monitor tx6000 Brochure

6 Channel Mic/Line Mixer

TX6000

Description

The TX6000 is a high specification, single rack space, 6 channel mic/line mixer suitable for desk or

rack mounting. The mixer is designed to operate from both AC mains power as well as 24 volts DC.

Inputs

Six dual mic/line inputs are provided. The mic inputs are active balanced and feature 3 pin XLR

female sockets. Each channel also includes dual female RCA line/aux sockets.

Outputs

The TX6000 features a balanced line output via a 3 pin XLR male socket. A mono tape output 

is also available via dual female RCA sockets. A 1/4” mono headphone socket is included on the

front panel.

Controls

Front panel controls include a master output level control plus overall bass and treble controls.

Individual channel level controls are provided for all six inputs.

VCA Control

The master volume can be controlled remotely. External VCA control would normally be via a pot

connected to a two wire rear panel barrier strip.

Metering

A 7 segment LED meter is provided for the master output. A power “on” LED is also included.

Muting

Muting is available via the optional VOX operated plug-in TX3010 or TX3014 precedence cards.

The TX3010 provides priority from channel 1 over all other channels. The TX3014 provides two lev-

els of priority. Channel 1 is the master mute channel and overrides channels 2-6, whereas channels

2 will mute channels 3-6 only. 

Tone Generators

The ATC5488 is an optional plug-in accessory providing 4 tones (Bell, Pre-Announce Chime, Alert

and Evacuate). The ATC5488 plugs into the main board via a 7 pin connector. Activation wires can

be fed through a rear panel slot below the 24V DC connector. Each tone can be activated by a sim-

ple contact closure.

Phantom Power

Phantom power (18V DC) is provided on all mic inputs.