avolites pearl expert titan User Manual

Page 110 – 10. Remote control

 

 

 

 

PearlExpertTitan_Man_v3.doc  29/03/2010 13:28:00 

required fixtures, then press More, then Macro, then press the macro 

function you want. 
For example to reset fixtures 1 to 10 you would press 
1 Thru 10 More Macro Reset 
 

The fixture list view shows you 

all the fixtures in a familiar 

spreadsheet style, including 

the user number, fixture type, 

DMX address and legend. A 

drop down “Action” list sets an 

action which will be activated 

when you select a fixture. 
For example if the action is set 

to Locate, pressing a fixture 

once will locate it, and pressing 

the same fixture again will 

switch it off again (dimmer at 

0%). 
The All button selects all 

fixtures, or click on a fixture in 

the list to select it. When using 

“all fixtures” you need to click OK to carry out an action. 
You can alter the sort order of 

the list by clicking a column 

header. An arrow indicates 

which is the current sort 

column (the leftmost column, 

User Number, in the picture). 

To reverse the sort order, click 

the column header again. 
Fixtures in the Programmer 

are highlighted in Blue. 

Fixtures in the Editor are 

highlighted in Cyan. 
You can filter fixtures using the Legend text by typing text into the 

Filter box. For example typing “drum” into the filter box would show 

only fixtures 14 and 13. 
The dropdown box above the 

fixture type allows you to filter 

the list to only that type of fixture 

as shown in the picture. 

The playback list view shows you 

all the playbacks including the 

playback type and legend. A drop 

down list allows you to carry out 

actions on the playbacks including 

“on @ level” (for example Full, or