aviosys surf pop beta User Manual

8 

 

The local device section is where you will find devices that are located in your Local Area Network or 

(LAN). These devices will show up automatically when a device has been detected. Once detected you 

can connect to the device or setup the device from this section.   

Surf pop was designed to create a quick user experience with the software. Any 9070 IP Kamera’s that 

is on manufacturer default will be able to automatically be detected by surf pop and can easily be 

seen without any setup. Simply just press and play.   

 

But for people who have special network requirements or need to setup their device, you will need to 

do the following: 

1.)  Select the device that you would like to setup and click on the setup device button. 

2.)  Then type in all the appropriate information including IP Address, Port, Username, Password, 

Country and Location and hit submit   

Note: This can only be done with Administrator rights. So if you are login in with a guest account no 

changes can be made 

3.)  Then to see if the device was correctly setup, simply double click on the device in surf pop and a 

pop window will appear.